http://WWW.AKDINDUS.NET
ADHIAMTHERMAL 58633f908bf1620a045a5862 False 222 15
OK
background image not found
Found results for
'gap range'
Replacement Spare Gaskets QAR   0 QAR  0
-NaN%

Replacement Spare Gaskets

Plate heat exchangers gasket is one of the crucial part for the operation and it needs to consider the elastomeric properties in line with the application. An elastomer is composed of a large number of products: polymer, fillers, plasticizers, activator, accelerator, antioxidant… The formulation of an elastomer can be optimally improved to achieve desired physical traits including hardness, compression set, heat resistance and chemical properties. These parameters must be considered to choose the must appropriate elastomers for a particular gasket application. When an elastomer gasket is not used in the proper temperature range, its life can be shortened and leakage can occur. Heat plate exchanger gaskets must be designed with consideration of the following physical properties: Compression set: Hardness Tear strength: Tensile strength and elongation at break: Gasket MOC : NBR, NBR-HT, EPDM, EPDM-HT, Viton A, Viton G etc Make : Almost all makes , we can support. Some of the regular makes are

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
Hydraulic Tightening device QAR   0 QAR  0
-NaN%

Hydraulic Tightening device

Capacity 13 - 95 ton Stroke 8 - 155 mm Center Hole Diameter 19,6 - 79,0 mm Max. Pressure 700 bar Easy to dismantle and Assemble plate pack of plate heat exchangers Less time duration to complete the assembly No possibility of misalignment of plates while assembly The tightening device shall consist of the following components : 60 Ton S/A Hollow Plunger Cylinder, Stroke: 76mm, Closed Height: 247mm Economy Pump, 3-Way Valve, Single Acting Max. operating pressure 700 bar Gauge Adaptor, 1/4" Gauge Port Pressure Gauge, Face Dia 2.5", 1/4" NPTF Thread, Range 0-10000 PSI 3/8" Hi-Flow Coupler consisting of CR400 female half & CH-604 male half 6 feet Hose, 3/8" NPTF, .25" I.D. with CH-604 Coupler 3/8" NPTF Manifold Valve, 4-Way Cylinder Half (Female) Coupler of C604 20 feet Hose, with CH-604, 3/8" NPTF, .25" I.D.

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
Free flow Type QAR   0 QAR  0
-NaN%

Free flow Type

The contact point inside plate gap is almost negligible. The plates contour move in parallel with each other and do not meet. This unit is unit in fluids, where either Viscosity is very high or % solid and fibrous material is very high. Free flow nature of plate help in passing of fibrous and highly viscous material without hindrance. The plates finish confirms to 3A standards. Plate gap range from 5 mm to 12 mm – all throughout - Free flow. The gasket material used are Nitrile rubber, EPDM The plate material used, SS316 etc. The PHE size in this range varies from 4” connection size to a maximum of 14” connection

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
Spiral Heat Exchangers QAR   0 QAR  0
-NaN%

Spiral Heat Exchangers

Manufacturing is done by rolling two sheets around a centre core to form two concentric spiral passage. The sides are welded and forms two passage . one for hot and another for cold fluid. Spacer Studs: The plate gap is maintained by welded studs and this can be tailor made as per the requirement of the applications. Circular design Large surface to volume ratio and hence very compact Easy maintenance Counter current flow Self Cleaning effect in the passage in spiral HX As this single passage and this induce high shear stress and hence any particle in the passage that will be scrub away as they form. Hence reduces fouling,. Application For high viscosity fluid Fouling Liquids, Fibresm Sludges etc As solvent recoverycondenser in Pharma Industry

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
Gasket Type QAR   0 QAR  0
-NaN%

Gasket Type

Plate heat exchanger consists of corrugated plates fixed with gasket and these are mounted between fixed frame and movable frame , Top and Bottom carrying bar are used for hanging the plates in between frames and the ties rods are used for tightening to the required plate pack. Fluids enter through the connections in the frame and are distributed in between plates. The fluids flow thorough alternate passages between plates by means of gasket arrangement. More than 50 sizes available with every size two to three plate pattern More than 50 sizes available with every size two to three plate pattern Connection size available from 25 mm to 500 mm Design Pressure up to 25 bar Plate MOC: AISI304,AISI316,SMO254, Hastelloy C 276 , Titanium , TI-Pd, Nickel etc Gasket MOC : NBR, NBR Peroxide cured, HNBR, EPDM, EPDM -P, Viton A , Viton G etc

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
Semi Welded Type QAR   0 QAR  0
-NaN%

Semi Welded Type

Semi welded Plate Heat Exchangers Two plates are laser welded with each other and are called as a twin plate or cassette. These two cassettes when joined, from channel where other fluid flows. These units are mostly used as evaporators or condensers, where the gaseous fluid Flows within the cassette and the other fluid flows through the gap formed by cassette. These units are also used in application where primary fluid is not compatible with the regular gaskets. The gasket material used is Nitrile rubber, EPDM, VITON and NEOPRENE as ring gasket. The plate material used, based on process parameters and the fluid are diversified like,SS316, Titanium, and SMO 254 etc. The PHE size in this range varies from 2” connection size to a maximum of 10 ” connection size.

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
1
false