http://WWW.AKDINDUS.NET
ADHIAMTHERMAL 58633f908bf1620a045a5862 False 222 15
OK
background image not found
Found results for
'available'
Brazed Plate Heat Exchangers QAR   0 QAR  0
-NaN%

Brazed Plate Heat Exchangers

Brazed plate Heat Exchanger is constructed of a series of Pressed corrugated plates in stainless steel. These plates are stacked one over other with copper foil in between for Joining and kept in oven for brazing together. The plates are stacked in such a way that flow passage one side primary fluid and another channel secondary fluid passage. Features: Small Footprint Lower Hold-up Volume No Gaskets to Replace High and Low Temperaturesv BPHE plates and channel types Certain BPHEs are available with different types of channel plates where the herringbone pattern varies. The benefit of different herringbone patterns is that the hydraulic and thermal characteristics of the BPHE can be modified. For example, two BPHEs can have the same pressure drop on both sides despite different flow rates. The fluids can pass through the heat exchanger in different ways. For parallel flow BPHEs, there are two different flow configurations: co-current or counter-current There are several different versions of the channel plate packages. Examples include: Dual-circuit BPHEDual-circuit BPHE Two-pass BPHE, which corresponds to two units connected in series. Dual-over-two-pass BPHE Material combinations There are different BPHE product categories depending on material combinations and design pressures. The standard plate materials are AISI 316 stainless steel, S, vacuum-brazed with a pure copper filler, C, or a nickel-based filler, N. For demanding applications, the plates can be made of SMO 254, a stainless steel with a higher content of molybdenum.

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
Gasket Type QAR   0 QAR  0
-NaN%

Gasket Type

Plate heat exchanger consists of corrugated plates fixed with gasket and these are mounted between fixed frame and movable frame , Top and Bottom carrying bar are used for hanging the plates in between frames and the ties rods are used for tightening to the required plate pack. Fluids enter through the connections in the frame and are distributed in between plates. The fluids flow thorough alternate passages between plates by means of gasket arrangement. More than 50 sizes available with every size two to three plate pattern More than 50 sizes available with every size two to three plate pattern Connection size available from 25 mm to 500 mm Design Pressure up to 25 bar Plate MOC: AISI304,AISI316,SMO254, Hastelloy C 276 , Titanium , TI-Pd, Nickel etc Gasket MOC : NBR, NBR Peroxide cured, HNBR, EPDM, EPDM -P, Viton A , Viton G etc

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
Ratchet Spanner QAR   0 QAR  0
-NaN%

Ratchet Spanner

This ratchet type spanner is specifically used for opening and closing the plate heat exchanger frames . Sizes available 24,36,46, 50 , 55,60,70,75mm and can be tailor made to meet client requirements. Smoother operation Non slip while operation.

QAR 0 QAR 0

Availability:True

Pay mode:COD only

view details
1
false